Technical Information | Page 2 of 4 | Metal Roofing Magazine

Lightning protection facts to share with building owners

Posted by Linda Schmid | Safety & Fall Prevention, Technical Information

By Jennifer Morgan, Director,East Coast Lightning Equipment Remember the time when metal roofing...

Staining of Steel Panels from Steel Debris

Posted by Metal Roofing Magazine Staff | Technical Information

BACKGROUND Steel debris, when allowed to remain on a building following its construction, will...

Panel Systems That Work Well for Metal Roof Retrofits and Recovers

Posted by Metal Roofing Magazine Staff | Retrofit & Recoatings, Standing Seam, Technical Information

By Charlie Smith, McElroy Metal In our last article (Metal Roofing, October 2022), we discussed...

Tech Update: Drones

Posted by Linda Schmid | Technical Information

In June 2016, FAA amended its regulations to allow the operation of small, unmanned aircraft...

Metal Roofs: Recover or Remove?

Posted by Karen Knapstein | Standing Seam, Technical Information, Through Fastened

Reroof over existing or remove and replace? That is a question that has to be answered with every metal roof that has reached the end of its service life.

Metal Coatings – Metal Roofing Flashback

Posted by Karen Knapstein | Coils & Coatings, Technical Information

With so many finish options available for metal roof panels, choosing the right one can be difficult. This article is intended to guide the reader through the selection process by providing basic information on the most popular finishes.