DYNA-CLAMPS® are a non-ferrous non-piercing clamp for attachments to standing seam metal roofs. Thirteen different DYNA-CLAMPS® with round-point setscrews are available to accommodate many different profiles of standing seam metal roofs. DYNA-CLAMPS® have undergone extensive third-party testing by Encon Technology, Tulsa, Oklahoma. DYNA-CLAMPS® are an integral part of our very popular DYNA-GUARD® snow retention system for metal roofs. All DYNA-GUARD components are extruded from aircraft quality, high tensile aluminum “6005A T61 Aluminum.”
The Ply-Lo Extreme line of fasteners is designed for extreme environments. The Ply-Lo Driller is the latest innovative addition to the company’s fastener line, designed to save contractors time and money. The patented Ply-Lo Driller features a design intended to be more forgiving than other fasteners. This means the tip is designed to reduce the likelihood of “walking” when fasteners are driven at a slight angle. East Coast has fasteners available in colors to match virtually any panel in lengths of 1”, 1-1/2”, 2”, 2-1/2” and 3”.
Mini Drill Points (MDPs) are the solution when fastening panels into wood or lightweight steel. MDPs deliver clean cut holes with no pig tailing, and with industry leading pullout values. MDPs can drill up to 16 gauge and will not fracture Fiberglass or PVC panels. The High Hex Head provides stability during installation and our Flow Cone Washer will never leak. MDP’s Low Profile Head is ideal for residential applications. MDPs can be powder coated to match the color and warranty of your panel.
As a recognized industry leader, Atlas Bolt & Screw offers the widest selection of metal-to-metal and metal-to-wood fasteners. Our Long Life Ultimate Series has you covered for any wood or metal project. Both our Wood Ultimate and Metal Ultimates are backed by a lifetime warranty against red rust. The #12 Metal Ultimate features an EPDM tubular washer and a TCP self drilling point. The #10 Wood Ultimate features a multi-seal washer and a type 17 sharp point. Both are available in a variety of sizes.
The new WindClamp2X™ is designed to increase wind resistance for standing seam and other concealed-fastened metal roofs. S-5!’s WindClamps™ are small aluminum clamps placed over the roof’s seam at designated intervals to prevent male-to-female seam separation and/or seam separation from the roof’s mounting clip. A cost-compelling alternative for new construction, S-5! WindClamps can also be used in retrofit applications to bring older roofs into compliance with current codes and wind standards.
Solar Snap™ by AceClamp® Solar™ is an adaptive, robust solar racking system built to withstand harsh High-Velocity Hurricane Zone winds up to Cat 4. Designed to work with any of AceClamp’s metal roof clamps, it’s an ideal solution for SSMR, Island Style Cement Cover Board Roofing, and Single-Ply. Fully assembled components make for an easy-to-use, fast-installing product. The unique cross-platform design adapts to all roof types — meaning you’ll have less inventory to maintain.
The patented SCRAIL® ROOFLOC® System was developed to install metal roofing, siding, and interior liner panel quickly and efficiently. Eight times faster than traditional screws and two times faster than collated screws. This performance could only be achieved by the combination of the pneumatic FASCO® Roofing Installation Tool and the SCRAIL® ROOFLOC® fasteners. Decreases time installing screws. Eliminates the need to pre-drill eliminating metal shavings and pigtails. Creates a better watertight seal than traditional screws.
Golden Rule Fasteners stocks a wide variety of fasteners for residential metal roofing, metal buildings, agricultural buildings, storage sheds, and carports. Whether you need fasteners for roofing, siding, or trim, mill finish or color matched to your painted panels, #9, #10, #12, #14, or 5/16” diameter, we probably have what you are looking for. Our extensive inventory allows us to ship most orders the same day they are received. Whether you are looking for a primary supplier or a good backup supplier for those hot orders, we are eager to assist you.
Metal roofing panel quality is such that a 40-year warranty against premature rust is now standard. To complete the system warranty, a long-life fastener should be paired with the panel, The #12 SCAMP 304SS cap metal to wood Type 17 point and metal to metal self-drill will protect the roof investment with its own 40 year warranty. It is very inexpensive insurance for any roofing project.
Designed for performance, Everlast Roofing, Inc. introduces The Answer RDP Woodscrew. Offering a long-life solution over standard fasteners, The Answer RDP Woodscrew performs at the same quality level as all Everlast products. Combining cross alloy mechanical plating with extra UV-resistant pigmentation, the Answer RDP Woodscrew is available to Everlast Roofing customers in 20 colors with a 40-year warranty at an affordable price.
Founded in 1848, Maze Nails will be celebrating 174 years in business in 2022! We pride ourselves on providing a superior product that withstands the test of time. Currently, Maze Nails is the largest specialty manufacturer in the country and continues to grow. Our top-quality fasteners are in stock and ready for immediate shipment; no worries about the global shortages affecting the fastener world because ours are domestically made. The Maze Family runs its operations in Peru, Illinois; we are proudly 100% Made in the USA.
Day Glow Industrial has been a specialist maker of drilling and tapping screws since 1996. Located in Tai’Chung, Taiwan, Day Glow has several years of experience in metal building construction, and hence realizes the importance of screws. We focus on producing high-quality fasteners, from standard screws to customized screws.
